[TechAssist] Re: UPDATERe: KP46S15 Distorted pix,NOT CONV. problem
- From: "Damon" <DAMON101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 10 Nov 2001 08:06:20 -0500
Have you monitored the vertical drive signal off of the M board?? There's a
plug clearly marked at the top of M that connects to the D board
labeled.....If there's any doubt about that Ic being bad, replace it. I've
had only bad convergence and video jungle Ics on this set.
Good luck.
----- Original Message -----
From: "Ron Miller" <rlmbkm@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, November 09, 2001 10:22 AM
Subject: [TechAssist] UPDATERe: KP46S15 Distorted pix,NOT CONV. problem
>
> I have replaced the TWO stk392-010 also IC501 on D board,I said not conv
> output problem,Pix is stretched at bottom vert sweep changing.
> Ron Miller
> D.T.V. Texas
>
> ----- Original Message -----
> From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, November 09, 2001 1:19 AM
> Subject: [TechAssist] Re: KP46S15 Distorted pix,NOT CONV. problem
>
>
> >
> > Ron, common problem. Resolder the convergence IC's. If it
> > has module "D" and IC1705, that's especially what you want to
> > resolder.
> > -Clint
> >
> > God Bless Us All
> > Clint Hamilton, Owner
> > http://OrpheusComputing.com
> > sales@xxxxxxxxxxxxxxxxxxxx
> > Fax: 209-882-9602
> > TechAssist Administration
> > http://tech-assist.org
> > techassist@xxxxxxxxxxxxx
> >
> >
> > ----- Original Message -----
> > From: "Ron Miller" <rlmbkm@xxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Thursday, November 08, 2001 1:57 PM
> > Subject: [TechAssist] KP46S15 Distorted pix,NOT CONV. problem
> >
> >
> >
> > Have changed STK392-010.
> > This one hard to describe:pix is basically convergered,pix
> > has 3 colored
> > lines that flash though pix when blank screen see 3 bowed
> > lines,top of pix
> > looks like vert sweep changing amplitude.Pix is not out of
> > convergence pix
> > ix bowed and stretched at bottom.
> > This is a interment but changes good to bad quickly,I know
> > the jungle
> > cxa1477as gives problems in these but is this problem
> > somewhere else?Don't
> > get many of these, hanks.
> > Ron Miller
> > D.T.V. Texas
> >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
> >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
> >
> >
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
*****************************************
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
*****************************************
To UNSUBSCRIBE write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
