[TechAssist] UPDATERe: KP46S15 Distorted pix,NOT CONV. problem
- From: "Ron Miller" <rlmbkm@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 9 Nov 2001 09:22:07 -0600
I have replaced the TWO stk392-010 also IC501 on D board,I said not conv
output problem,Pix is stretched at bottom vert sweep changing.
Ron Miller
D.T.V. Texas
----- Original Message -----
From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, November 09, 2001 1:19 AM
Subject: [TechAssist] Re: KP46S15 Distorted pix,NOT CONV. problem
>
> Ron, common problem. Resolder the convergence IC's. If it
> has module "D" and IC1705, that's especially what you want to
> resolder.
> -Clint
>
> God Bless Us All
> Clint Hamilton, Owner
> http://OrpheusComputing.com
> sales@xxxxxxxxxxxxxxxxxxxx
> Fax: 209-882-9602
> TechAssist Administration
> http://tech-assist.org
> techassist@xxxxxxxxxxxxx
>
>
> ----- Original Message -----
> From: "Ron Miller" <rlmbkm@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, November 08, 2001 1:57 PM
> Subject: [TechAssist] KP46S15 Distorted pix,NOT CONV. problem
>
>
>
> Have changed STK392-010.
> This one hard to describe:pix is basically convergered,pix
> has 3 colored
> lines that flash though pix when blank screen see 3 bowed
> lines,top of pix
> looks like vert sweep changing amplitude.Pix is not out of
> convergence pix
> ix bowed and stretched at bottom.
> This is a interment but changes good to bad quickly,I know
> the jungle
> cxa1477as gives problems in these but is this problem
> somewhere else?Don't
> get many of these, hanks.
> Ron Miller
> D.T.V. Texas
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
>
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
