Don; You missed one. C305...the other 2.2ufd/35volt. Brown or red cap. -Ed- At 07:01 PM 12/8/2003 -0400, you wrote: >Have done a ton of these Toshiba's as have most techs for vert >problems.This one came in with insufficient vert sweep.C305=2.2 ufd/50vdc >cured that,but then I had vert overscan,which would not adjust enough with >the vert hgt. pot;R352=2k.Replaced the following with no change; >C301=2.2 UFD/50vdc >C306=1000ufd/35vdc >C308=220ufd/50vdc >C330=10ufd/50vdc >C310=1000ufd/35vdc >R352=Vert hgt pot,2kohm >IC301=AN5521 >Rechecked all my cap values.I'm an ASC for Toshiba & never had a simple >vert problem have me stumped.Checked all resistors in the vert. cct. & all >voltages are good.Inputs welcome.Maybe my yoke,which of course is bonded..TIA.. >Don of HARTS-TVCR-ASC >9 Robert St,Oromocto,NB,Canada,E2V3N2 >Tel-506-357-9785,Fax-506-357-6010 >hartstv@xxxxxxxxxxx > > > >***************************************************************************** >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/