Thank Jeff, replacing that zener fix the set for horizontal line about 3/8 wide. pete Perdomo TV Inc. Since 1972 MIami, Fl. techassist-bounce@xxxxxxxxxxxxx From: jstielau@xxxxxxxx(Shoreline=A0Electronics) Date: Thu, Oct 21, 2004, 10:19am To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Toshiba Combo MV13M2 Reply=A0to: techassist@xxxxxxxxxxxxx Pin 17 of IC601 is the drive line. D615 is on that line & tied to ground ...I assume that's the one you need. D615 is a MTZJ6.8B ( 6.8V Zener) =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D "If you push something hard enough it will fall over." Fudd's First Law of Opposition - Sir Sidney Fudd ----- Original Message ----- From: "Pete" <wpt19@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 21, 2004 9:50 AM Subject: [TechAssist] Toshiba Combo MV13M2 Second posting,.. This is a Toshiba combo MV13M2, year 2002. On this set there is a zener diode to ground, on the vertical drive signal line, from the jungle to the vertical IC. Will somebody please send me the value of that zener diode? Thanks in advance pete Perdomo TV Inc. Since1972 Miami, Fl. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/