[TechAssist] Re: Toshiba CF36G40 shut down

  • From: "Ken Dinckan" <kdinckan@xxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 28 Mar 2002 00:07:47 -0800


I had similar problem replaced c830 fixed
Hope this helps
Ken Dinckan

e-mail to : kdinckan@xxxxxxx

All TV&Appliance Service
2747 Roosevelt Street # B
Carlsbad CA 92008
Tel:(760)4341131
Fax:(760)4348856
----- Original Message ----- 
From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, March 28, 2002 11:23 AM
Subject: [TechAssist] Re: Toshiba CF36G40 shut down


> 
> Try removing the CRT board from the CRT. Turn on with Variac at 100 volts
> AC. If it stays on....bad CRT.
> 
> -Ed-
> Tel-Tek Electronics
> Midland, Ontario. Canada.
> 
> teltek2@xxxxxxxxxxxx
> The Proud Grandfather of a New Baby Girl.
> Nine Pounds....11 ounces.
> March 27th.
> Congratulations Roger and Brenda.
> Secondary........
> teltek35@xxxxxxxxxxx
> 
> Tel-Tek Electronics.
> 
> 
> 
> 
> 
> ----- Original Message -----
> From: "albert vasquez" <albertv29@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, March 28, 2002 12:05 PM
> Subject: [TechAssist] Toshiba CF36G40 shut down
> 
> 
> >
> > I`m in need of a little assistance with this unit with a shutdown
> > problem.Unit will come up and run a few seconds at a time,and shut
> > down.After shutdown unit will fire right back up,and shut down again.
> > When unit does have video/raster it`s washed out.I`ve done everything I
> can
> > without scematics including following Toshibas web page procedures.Any
> help
> > will be greatly appreciated.
> >
> > Albert vasquez
> > Orion services
> > Victoria Tx 77901
> > 361-574-9280
> >
> >
> > _________________________________________________________________
> > Join the world's largest e-mail service with MSN Hotmail.
> > http://www.hotmail.com
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
> 
> ------------------------------------------
> Make your TechAssist database better!  
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
> 
> 


------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: