Hi Jason, tell him to look for any small jumper wires on the +/- volt supplies to the STK's these jumpers may be short bare silver wire or brown or black insulated wire. resolder all jumpers, these are all near the STK's. hth Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Jason - Excel Distributing" <JMartin@xxxxxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 15, 2004 3:13 PM Subject: [TechAssist] Toshiba 50HX51, blows fuse, remove STK ok, add STK dead again > Hi guys - Could use a little help here for one of our good customers, thanks for anyhelp!!!!!! > Model # 50HX81 > > Toshiba 16x9 screen > > Repeatedly blows 5 amp fuse. > > If the convergence output ics STK392010 are removed, fuse is fine and pic is on but out of convergence, 16V line stays up. > > When STK's are reinstalled it blows the fuse again then is dead. > > Has used oem STK's. > > Thanks!! > > > Sincerely, > > Jason Martin > Excel Distributing Inc. > 1819 Mentor Ave. > Cincinnati, Ohio 45212 > > ph-800-733-3329 fax- 800-735-8007 > www.ExcelDistributingInc.com > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/