I saw something like that in a 60" Toshiba and the fix was in the IF module. Try heating or cooling the IF module. I found it with freeze spray. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 15, 2006 10:50 AM Subject: [TechAssist] Toshiba 50H82 Chassis-TAC0263 > This set has a ragged picture..(sawtooth) for the first 45 minutes, then > gets a little better. Are these caused by caps in the Scan Converter? > -Ed- > E. Gaidies > Tel-Tek Electronics > Ontario-Canada > teltek3@xxxxxxxxxxxx > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/