you didn't mention checking capacitors in the vertical circuit. What about the Yoke,can you Ring it ??? Peggs At 12:31 PM 6/8/04, Ohio Consumer Electronics wrote: >Set came in with no vertical deflection. Replaced LA7833 and it looked fine. >About three weeks later it's back with same problem. I put in a new LA7833 >and it blew immediately! I couldn't find any other problem so I figured >maybe a bad new part so replaced it again and it worked ok this time. Ran a >bit hot after a while but that's normal with these newer cost reduced >designs. I sent it home. Well 1 week later and it's back again! Same >problem. Customer said it played all day the day before but today it played >only 10 minutes and went out. The LA7833 would not have been that hot after >only 10 minutes so I don't think it's a thermal problem - that and the fact >that one blew right away. I can't find any bad connections anywhere. I >really need some help with this one, the customers been pretty good about it >so far but I think this may be my last chance to get it right... >I'll appreciate any tips/suggestions - Thanks Much! > >Joel Jacobs >Ohio Consumer Electronics >Pickerington, Ohio > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/