[TechAssist] Re: TV Zenith Z25A02G, 9-1789, video distortion

Jeff,I think you have a bad CRT focus grid.While it is happening,you may
turn down the G2 slightly and see if it clears.This drives the crt a bit
less and may relieve the symptom.But, I think the CRT is it.

Jeff Dougherty wrote:
> 
> This is an odd one.1998 set, 9-1789 module
> Usually during scene change, the picture, about two inches high appears out
> of focus, distorted.
> Distortion is all the way across the CRT, about two inches high, lasts for
> any where from a few seconds, or until the next scene change.
> At one point, I had rainbow colors around the outside edges, turning off,
> and back on and the picture was normal until these wavy, distorted bars
> appeared.
> Has any one seen this one before?
> 
> Jeff
> 
> FAX 1-413-280-0677
> Jeff Dougherty **Vacation 8/27 to 8/30**
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg, PA 17111
> 717-909-8844
> VCR tips, electronics info & general interest.
> www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> 
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://geocities.com/circuit_work/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://geocities.com/circuit_work/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: