Al, I just saw some Philips remotes at Electro Sound (Philips-4, 3139-228-81451) for $4.99 each. Has both "Smart Sound" and "Smart Picture" buttons. Electro Sound is 1-800-441-6110. A fax is a very useful tool. Needed a cabinet part for a Panasonic camcorder this morning. I don't have the manual and would take a miracle to describe it well enough for someone to send me the right item. Tritronics faxed me the parts breakdown page from the area I needed. Minutes later the right part was on the way. Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) On Mon, 6 May 2002 12:10:58 -0400 "al m" <ampm@xxxxxxx> writes: > > thanks for everything Jim. i guess i'll have to get one .the > customer said > he'd pay for it.i didn't have the fax on at that time.i don't leave > it on > because i'm not sure how it works yet. the help menu doesn't help > much. i > don't really use a fax that much but i would really like to figure > this > thing out. > al marquardt > ampm@xxxxxxx > > > ----- Original Message ----- > From: "Jim Myers" <jr.myers@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, May 06, 2002 11:20 AM > Subject: [TechAssist] Re: TS2744 Chassis # 27B800 > > > > > > Al, I tried your fax again at around 9:50am CST, no answer. I also > called > > Philips tech line and they verified that you do have to have a > remote with > > either a "smart" button or a "vcr/clr" or "vcr/set" button, (one > Philips > > tech said vcr/clr and another said vcr/set) to save the vertical > settings, > > all other settings can be done with the customers remote. Guess > you have > no > > choice but to get your hands on one, if I had one I'd ship it to > you to > use > > and return, maybe someone else will make the same offer. > > Jim Myers > > Telrad Electronic Services Co. > > Fort Wayne, IN 46815 > > jr.myers@xxxxxxxxxxx > > 260-432-4486 Fax and Voice > > Fax is always on > > ----- Original Message ----- > > From: "Ron Purkhiser" <rpurkhiser@xxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Saturday, May 04, 2002 3:57 PM > > Subject: [TechAssist] Re: TS2744 Chassis # 27B800 > > > > > > > > Al, I have the following for the B8: > > > > Service Mode, (B7, B8) > > CTV's ----Must have remote with "smart" button > > Use the remote to activate the service menu. Press 06 25 96, and > menu > > Use menu button to scroll thru pages A thru H of items to be > adjusted. > > Use channel up/down for adjusting. > > > > When finished, to save adjustments, press "smart", 9, Volume up. > > Set should turn off. Unplug for a few minutes, then plug back in. > > Everything done with the remote. > > > > Ron > > Mailto:rpurkhiser@xxxxxxxxxx > > Ron Purkhiser, Treasurer, NESDA of Ohio > > Editor of the Speaker, Nesda of Ohio Newsletter > > Enjoy the Speaker Online, www.nesda-ohio.com > > Ron's Video Repair > > 56 Oakhurst Dr. > > Munroe Falls, OH 44262 > > Phone and Fax. 330-688-6624 > > > > > > > > ----- Original Message ----- > > From: "al m" <ampm@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Saturday, May 04, 2002 4:03 AM > > Subject: [TechAssist] TS2744 Chassis # 27B800 > > > > > > > > > > can someone help me with this service adjustment. I go into > service mode > > and > > > the first page comes up SA in top left corner RT:00 00 under it > and > under > > > that i get > > > bank :00 > > > register:00 > > > value: FF > > > then when i push #2 on remote i get SB in top left corner and > > > IF-PLL:42 > > > push #3 SC in corner > > > AGC:02 > > > and so on.Can anyone explain how to adjust these parameters and > how to > > save > > > them i don't understand what some of them are for, like Bank and > Register > > > and Value. these are default values as i reset the values as jim > meyers > > > explained.thanks Jim.problem is my vertical is compressed. when > i go to > > > height and vertical slope i can get picture to stretch to normal > but i > > can't > > > save the settings this is what i need to know how to save the > settings. > > > original problem was no vertical. replaced supply resister, > diode, and > IC. > > > then no raster no sound. after resetting eeprom picture is > compressed,and > > > have sound.No manual and i don't see many mags around here so i > really > > don't > > > want to spend $50 for a disc.thanks for listening. > > > al marquardt > > > ampm@xxxxxxx > > > > > > > > > > > > > > > > > > ------------------------------------------ > > > To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > > ------------------------------------------ > > > ***NEW*** Tips Added Instantly!!!*** > > > Submit Repair Tips here: > > > http://www.tech-assist.org/secure/tip/ > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/