[TechAssist] Re: TOSHIBA TV CF3062A Video Problem

Jeff,

    Thanks for the tip.  I will look at the connectors  and capacitors you
suggested.  I'll let you know if that fixes it.

Stephen
----- Original Message -----
From: "Shoreline Electronics" <jstielau@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, October 29, 2001 7:30 AM
Subject: [TechAssist] Re: TOSHIBA TV CF3062A Video Problem


>
> Stephen,
>
>  On alot of Toshiba sets we see cracked solder connections in the
connectors
> for the cables that run from the CRT drive board to the main chassis.
>  The end pin that supplies the 200V to the cathodes usually get a crack &
> causes the bright video when it drops low.
>
> Solder connectors on CRT drive & main board.
>
> Once you get that problem fixed....change C305 2.2u 50v & C342 1u 50v, in
> the vertical circuit if they are the original parts.  They are problem
> makers.
>
> Jeff Stielau
> Shoreline Electronics Repair
> 125 Beechtree Lane
> Westbrook,CT 06498
> 860-399-1861 Voice
> 860-664-3535 Fax
> jstielau@xxxxxxxx
>
> ----- Original Message -----
> From: "stephen senn" <ssenn12@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, October 29, 2001 4:55 AM
> Subject: [TechAssist] TOSHIBA TV CF3062A Video Problem
>
>
> >
> > Howdy guys,
> >
> >     I have this TV that will give a good picture some of the time, but
> will
> > get bright and start smearing the video at the bottom of the screen.  It
> > just gets really blurry.  Even under normal operation, it still bleeds
the
> > red fairly bad.  Any suggestions?  I've already reflowed the Yoke board
> > connectors and their counterparts on the Main board.  Thanks in Advance.
> >
> > Stephen
> >
> >
> >
> > _________________________________________________________
> > Do You Yahoo!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
> >
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: