[TechAssist] Re: Symphonic VCR/DVD/CD player model WF802 has VCR problem.

Robert,
I can't seem to log in to TechAssist web site.
Home page will not load.
Did they change things recently ?
What web address did you use to up-load these files ?
I don't use it very often, so maybe I'm doing something wrong.
I have used it in the past, with no problems.

LLW

LeRoy Westlund
Westlund TV & Electronics
97 North Main                                "Where there's a will,...
Centerfield, UT 84622-0087           There's always a way."
Ph./Fax  435-528-3822
mailto:LLW@xxxxxxxxxx

-----Original Message-----
From: tvservice <tvservice@xxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Thursday, July 29, 2004 3:44 PM
Subject: [TechAssist] Re: Symphonic VCR/DVD/CD player model WF802 has VCR
problem.


>LeRoy,
>give me 5 minutes I will upload service manuals to members area
>Look for SYM_EWD2202 and SYM_WF802
>
>Robert
>tvservice@xxxxxxxxxxxxx
>H & H Electronics Inc
>
>----- Original Message -----
>From: "LeRoy Westlund" <llw@xxxxxxxxxx>
>To: "TechAssist" <techassist@xxxxxxxxxxxxx>
>Sent: Thursday, July 29, 2004 2:48 PM
>Subject: [TechAssist] Symphonic VCR/DVD/CD player model WF802 has VCR
>problem.
>
>
>> Hi members,
>> The DVD player works OK on this unit.
>> The problem is in the VCR deck.
>> It will load, and unload the cassette, but the capstun motor does not
turn
>> on.
>> As a result, there is no takeup on the tape when it ejects the cassette,
>and
>> therefore eats the tape.
>> I tried to dis-assemble the unit to check the mode switch for corrosion.
I
>> found it to be a much bigger job then I expected.
>> A large spring about 1/2 inch in diameter,and 1/2 inch long, fell out
from
>> under the deck. I might need a service manual before proceeding with
>further
>> repairs, but if someone could at least give me the part number for the
>mode
>> switch, and tell me where the spring should be installed, I might be able

>to
>> get by.
>> I was going to back out of this job, but, after re-assembling the unit,
>the
>> drum motor spins at power turn on, and the cassette-in light blinks. I
>think
>> the spring is causing my new symptoms, or, maybe I just screwed up the
>mech
>> alignment. I need to at least restore the unit to the same condition as
it
>> was, before I made it worse. Cause the DVD player won't activate, until I
>> fix the VCR. Another set from hell,...again.
>>
>> Any help is appreciated,
>> LLW
>>
>> LeRoy Westlund
>> Westlund TV & Electronics
>> 97 North Main                                "Where there's a will,...
>> Centerfield, UT 84622-0087           There's always a way."
>> Ph./Fax  435-528-3822
>> mailto:LLW@xxxxxxxxxx
>>
>>
>>
>> -------------------------------------------------------------------------
-
>---
>> Lost Password:
>> http://www.tech-assist.org  and select "Login Problems?".
>> Email Archives:
>> http://www.freelists.org/archives/techassist/
>
>
>
>---------------------------------------------------------------------------
--
>Lost Password:
>http://www.tech-assist.org  and select "Login Problems?".
>Email Archives:
>http://www.freelists.org/archives/techassist/
>


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: