hve set in shop measures 2.2 k, need #horz. out transistor ----- Original Message ----- From: "Shoreline Electronics" <jstielau@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 02, 2001 8:26 AM Subject: [TechAssist] Sylvania/ADI PD959 Parts ID Needed > > > Make : Sylvania > Model : F90 or PD 959 ( Same as ADI PD959) > FCC # : BR8PD959 > Problem : Customer reported intermittent arcing noise from inside for the > past few months...then she quit. Inspection showed the 2nd anode wire > resting against a 2 watt resistor on the small daughter board mounted to the > side metal cage. Burned a small hole in the 2nd anode lead and was arcing. > > A few parts on this daughter board are now shorted/burnt. Only one we cant > ID is location R4. > > Does anyone have a print on this OR one in the shop they could look at? > > Also....The 2 Watter R2 looks like a 2.2K. If we could ID that also that > would be great. > > Thanks for looking. > > Jeff Stielau > Shoreline Electronics Repair > 125 Beechtree Lane > Westbrook,CT 06498 > 860-399-1861 Voice > 860-664-3535 Fax > jstielau@xxxxxxxx > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.