Make sure the Mode switch isn't shutting it off. Give it a spray of cleaner and see what happens. If it starts change it. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 21, 2005 4:29 PM Subject: [TechAssist] Syl. SRC22194 tv/vcr shut-down after replacing 6 parts in PS,was dead > Sylvania TV/VCR combo > Model: SRC22194 DOM 2003 > Unit came in dead, replaced Q605.Q606,IC601 (photo-op),D615 (33v.), > D629 and R566 ( tested good). > Replaced as per tips for dead set. > Now at plug in I read 42.3 vdc at flyback ( stand by) push power button > HV > comes up to 25KV and B+ reads 115vdc set shuts down within 1 second. > Need more tips or schematic of PS circuit uploaded to members area or > direct to: rlmbkm@xxxxxxxxxx > Also can't tell if vert is ok or not and no "pop" at speaker.tia > Country TV > Ron Miller > Inez, TX. 77968 > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/