I've never had any problems with ChipQuik. It is very easy to use, just takes practice like everything else (I always have to remind myself I really did not come out of the womb with a multimeter in my hand). Bob Waterman, CET® Service Manager Gemini Computer, TV, & Security Alarm Systems, Inc. (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx ----- Original Message ----- From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, May 10, 2002 8:49 PM Subject: [TechAssist] Re: Surface-mount desoldering/removal unit > > Its widely available from distributors. Converts the solder to a very low > melting temperature form. If the IC is not glued down you can almost lift it > off without damage to chip or traces. You might have to heat the IC to break > the glue bond. Biggest problem is cleanup to get rid of every trace of the > alloy. After cleanup and applying fresh solder and resoldering I pry on > every trace just to make sure, but I have had some recalls after a few weeks > for some of the solder joints having cracked, so I use ChipKwik only as a > last resort. > Jerry Silverman > Greentron Inc > 4 Newland Ave > Greenville SC 29609 > 864 232 3889 > Fax 271 2080 > mailto:greentron@xxxxxxx > ----- Original Message ----- > From: "Perry Hill Electronics Service" <phes1@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, May 10, 2002 9:21 PM > Subject: [TechAssist] Re: Surface-mount desoldering/removal unit > > > > > > Marty, about 3 months ago I went to the full list and asked the almost > > identical question. As a result I purchased a Xytronic 988 from Howards > > and have been very pleased. I'm late on this post and saw Bob Waterman > > mentioned "Chip Quick" in response to your question. The unit I > > purchased is great for tuners, flys and the like but was not designed > > for LSI removal. The units for LSI removal are very expensive. To > > Bob or anyone: I would like to hear more about Chip Quick, what it is, > > and where it is available. Thanks > > > > > > Mark Wentowski > > Perry Hill Electronics Service > > 3836 Harrison Rd > > Montgomery, AL 36109 > > Voice: (334) 279-5622 > > Fax: (334) 273-9050 > > Email: phes1@xxxxxxxxxxxxx > > ----- Original Message ----- > > From: 19th Street Audio <audio19@xxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Friday, May 10, 2002 8:33 AM > > Subject: [TechAssist] Surface-mount desoldering/removal unit > > > > > > > > > > Hello, > > > We are in the market for a rework station for the removal & > > desoldering of > > > surface mount IC's. > > > We have some contact with Howard Electronic Instruments (a Nesda > > member) and > > > have looked over what they supply. > > > We are thinking of the Xytronic model 626TP unit, I would like to know > > if > > > anybody has one of these that they are using, and could give us some > > > feedback on it's performance. > > > > > > Also, Howard Electronic Instruments seems like a great company from > > the > > > short time we have dealt with them......any other members dealt with > > them > > > with good results?? > > > > > > Thanks in advance! > > > > > > Marty Mertz > > > 19th Street Audio > > > 532 North 19th Street > > > Allentown, Pa. 18104 > > > audio19@xxxxxxxx > > > 610-434-8833 > > > high quality repairs since 1968 > > > > > > ------------------------------------------ > > > To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > > ------------------------------------------ > > > ***NEW*** Tips Added Instantly!!!*** > > > Submit Repair Tips here: > > > http://www.tech-assist.org/secure/tip/ > > > > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/