hello everyone thanks to everyone for the pt. #'s the tv had no pic/sound open fuse, shorted output trans(2sd1556), d502 nte(552) was shorted and loading down the flyback vert output ic(ta8427) was also bad everything good to go after replacement of parts, thanks again andy andy's tv vcr ser donora,pa ----- Original Message ----- From: "Ralph Dorsey" <Merlin-Wizard@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 31, 2001 9:24 AM Subject: [TechAssist] Re: Subj: sharp tv27f-s50 > > diode that rectifies the 26vollts from flyback should be a ecg552. > > Jerry wrote: > > >D502 is a Sharp part # RH-DX0131CEZZ, I don't know if there is a good > >generic cross for this. It is the +26 volt supply for vertical and > >regulator control. I would check the vertical output ic as well TA8427K... > >Jerry > >----- Original Message ----- > >From: <Dude1127@xxxxxxx> > >To: <techassist@xxxxxxxxxxxxx> > >Sent: Tuesday, October 30, 2001 9:26 AM > >Subject: [TechAssist] Re: Subj: sharp tv27f-s50 > > > > > >| > >| Original mesasage: Date: 10/29/01 1:58:46 PM Eastern Standard Time > >| From: atv@xxxxxxx (andrew soltes) > >| Sender: techassist-bounce@xxxxxxxxxxxxx > >| Reply-to: techassist@xxxxxxxxxxxxx > >| To: techassist@xxxxxxxxxxxxx > >| > >| hello everyone > >| would someone have the pt# or sub# for diode location d502 on > >this > >| sharp tv tv came in dead , fuse blown, output trans shorted and diode > >| shorted, diode shorted was loading down flyback, ringer showed flyback > >bad > >| removed diode and ringer good on flyback > >| thanks for any help > >| andy > >| > >| andy's tv vcr ser > >| donora,pa atv@xxxxxxx > >| ----------------- > >| ANDY, d502 is RH-DX0131CEZZ (ECG552), Les > >| > >| Help make your TechAssist online repair tips > >| database better! Submit your fixes here: > >| http://www.circuitwork.com/techassist/tip/#tips > >| To unsubscribe write to: > >| techassist-request@xxxxxxxxxxxxx > >| with unsubscribe in the subject line. > > > > > >Help make your TechAssist online repair tips > >database better! Submit your fixes here: > >http://www.circuitwork.com/techassist/tip/#tips > >To unsubscribe write to: > >techassist-request@xxxxxxxxxxxxx > >with unsubscribe in the subject line. > > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.