And if that don't fix it check for any + or - dc voltage on the center lead of all the three lead resistors, one in each output channel. If any DC is found that is your problem channel..............take two aspirin and call back! ******************************************************************************************************************* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana peggs wrote: > tighten any/all ground screws. > resolder any UPC2581 chips,and check caps surrounding them > > Peggs > > At 12:33 PM 6/14/04, John & Sharon Mikowich wrote: > >>Make: Sony >> >>Model: STR-D965 >> >>Problem: Receiver keeps flashing " Protector ", nothing else works. >> >>Hi Everyone: >> >> Got this one in and all it does is flash " Protector" . Check all >>fuses, ok, checked outputs for shorts, no shorts seems ok, have +50v & >>-50v also have +12v & -12v from 2 regulators. Have no print on this & >>need to be pointed in a new direction to continue troubleshooting. >>Anyone have any tips on this? they would greatly be Appreciated ! >> >>Thank You In Advance: >> >>John Mikowich >>East Side Tv. >> >> >>----------------------------------------------------------------------------- >>Lost Password: >>http://www.tech-assist.org and select "Login Problems?". >>Email Archives: >>//www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/