[TechAssist] Re: Sony SDM-M51 15" flat panel computer monitor, bad connections? Correction.
- From: "Ty" <ty1k@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 10 Jun 2004 11:04:39 -0700
Kevin,
Did you get my note?
I uploaded the manual including schematic for this unit for you.
SY-SDMM51
Ty
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin
Sent: Wednesday, June 09, 2004 12:26 PM
To: TECH-ASSIST
Subject: [TechAssist] Sony SDM-M51 15" flat panel computer monitor, bad
connections? Correction.
This Sony flat panel came in with picture that looked like a generic
flag: 2 thick black stripes (up and down) on either side of a white
middle. As I connected and disconnected the computer, the image kept
changing. When I replaced the 15 pin connecter from the monitor to the
computer with my cable to test the customer's cable, the monitor started
working. I put the customer's cable back on and it is still working.
Now when I whack the monitor the picture flashes but is working steady
now. Obviously there are bad connections, but where might I find them?
I know these are hard to work on so I would like to know what I'm
getting into before I tear it apart. Thanks.
Kevin Wilks
Kevin's TV & Video Repair
Penticton BC Canada
kevintv@xxxxxxx
----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
