Hi Al, Did that and all I get is retrace. Def. not coming out of y/c jungle. Def. coming in at y/c input to y/c jungle IC301. My big problem is getting in there and interrogating that chip as I dont have the breakout cables kit for this set. The jungle is on the vertical standing brd that plugs into the backplane input brd and the main bottom brd.Impossible to reach. Although I did snake the ole scope probe in there for the y/c in&out chk.I did order them though. About $60 for 3. No nothing on rgb in at crt card. G2 good. Heater on like gangbusters. Has the A80 tube.Yes I do see all the protect diodes around that jungle. ----- Original Message ----- From: "al" <alleathe@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 20, 2001 2:01 AM Subject: [TechAssist] Re: Sony KV32XBR45 > > Ray, > turn up the g2 or screen and back down.If you get pix,crt is probably weak > and you have to rejuv it.I doubt if jungle is bad, they have > some kind of protective crap that reacts badly to weakening crt. Good luck. > al > > May God give us strength > Al's TV > alleathe@xxxxxxxxxxxxx > Mine Hill, NJ. > 973-361-5796 > alleathe@xxxxxxxxxxxxx > ----- Original Message ----- > From: "Ray Lufkin" <Rlufkin@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, December 20, 2001 12:43 AM > Subject: [TechAssist] Sony KV32XBR45 > > > > > > Hi all, > > Got a 1995 Sony KV32XBR45. Fires up ok. Has hi volt and sound but no > > raster. All power supplys ok. First one I've seen where Q601/2 is ok. I > have > > the print too. Have y/c into IC301 Jungle IC on the M board but no > output > > out of IC301 which then feeds the crt card cathodes amp.The jungle costs > > $90. Ouch. Any thoughts please? Thanks, Ray @ Lufkin Video BTW, jeez > is > > that a heavy tv or what!! > > > > > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe