Turn set on its face tap on neck while it clicks and shuts down abount 10 times I fixed a sony 32" that was flashing red then shuting down. I was going to use a isolation transformer but did not need it .The set is still working good. also have b&k 470 . Richard ----- Original Message ----- From: "Bill S" <billans@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, February 18, 2002 6:17 PM Subject: [TechAssist] Re: Sony KV32S20 (?) > > Neil; > I had a problem like that, not sure if it is the same or not. One side of > the heater filament is grounded and so the tube arcs over to ground. What I > did was to isolate the heaters with a homemade isolation transformer. There > was no more blinking occuring. Might this work for you? > Hope so! It would be nice to save this set and make the dollar stay put > into your pocket! > > Bill S > New Life Video & Audio > May God richly Bless you and your families > ----- Original Message ----- > From: <tvdoctors@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, February 18, 2002 1:06 PM > Subject: [TechAssist] Re: Sony KV32S20 (?) > > > > I've checked caps in and around ABL circuit and have chilled components. I > took the CRT board off and plugged the set in and heard high voltage corona > from CRT pins (Seems like it kept in time with the video blink). I slowly > approached the pins with a grounded screw driver and saw arcing from the > pins. Unplugged and put CRT board back on and plugged back in and picture > came on with a good picture (No blinking). If I adjust the screen control > too low, the picture will click off. I have a B&K 470 CRT checker, but no > adaptor for this tube. Does anyone know a trick to disable this blanking > problem? > > > > > > > ** Original Subject: RE: [TechAssist] Re: Sony KV32S20 (?)n> ** Original > Sender: "Ron Miller" <rlmbkm@xxxxxxxx> bb > > > > > > BAD CRT,got a Sencore CR70 or 700?Zap it.Good luck. > > > Ron Miller > > > D.T.V. Texas > > > > > > > > > ----- Original Message -----From: <tvdoctors@xxxxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Sunday, February 17, 2002 1:54 PM > > > Subject: [TechAssist] Sony KV32S20 (?) > > > > > > > > > > Model number washed out, but this is as close as could to post. > Problem > > > with this set is no picture at first then picture keeps flashing as set > > > warms up. Adjust screen control to get screen to stop flashing. 1st time > > > into shop, customer picked up and brought it back next day. Second time > out, > > > it lasted for about 8 days. Now it's back. Is there a way to defeat this > > > process on these sonys? I know that this generally happens if the CRT > is > > > bad but the picture is not all that bad. Neil > > > > > > > > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469 > > > > > > > > ------------------------------------------ > > > > Make your TechAssist database better! > > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > > > ------------------------------------------ > > > > To UNSUBSCRIBE your email address, click here: > > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > Or send a BLANK email with unsubscribe in the > > > > SUBJECT field to the address above. > > > > > > > > > > > > > > > > > > ------------------------------------------ > > > Make your TechAssist database better! > > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > Or send a BLANK email with unsubscribe in the > > > SUBJECT field to the address above. > > > > > > > > > >** --------- End Original Message ----------- ** > > > > > > > > > TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469 > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ---------------------------------------------------- Sign Up for NetZero Platinum Today Only $9.95 per month! http://my.netzero.net/s/signup?r=platinum&refcd=PT97 ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.