Most all of these sonys have a .47mf cap off of the HDT. Replace it if this has one. You might have to chase a few inches away on some models. TV Doctor Avalon, Wi ----- Original Message ----- From: "Art Bevilacqua" <abevilac@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, October 11, 2004 8:38 PM Subject: [TechAssist] Sony KV27V65 "Hot" Horiz Output Transistor > This set ate one set of new parts (Horiz output transistor, dual reg > transistor (MX0541) and a .47 resistor) after about an hour. We had > resoldered the drive transformer and other horiz items. > > Now we've got this set running again, but the Horiz Output Transistor = > just > seems to be running too hot. All voltage and waveforms from the sync = > chip up > to the base of the Horiz Output Transistor are perfect, but there is a = > bit > of "ringing" type distortion following the main pulse at the "primary" > windings of the flyback. > > I've never had to replace a flyback on one of these Sony's because of = > this > type of problem, but I'm thinking that might be needed here. > > Does this match anyone else's experience? > > (The parts we used are good originals from B&D) > > > Art Bevilacqua > Essex Radio and TV > 40 Main Street > Essex, MA 01929 > > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/