[TechAssist] Re: Sony KV-27TS27
- From: "Quenton Kilgore" <kilgorq@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 19 Sep 2001 20:11:37 -0700
HELLO!
Check the soldering in the horizontal drive circuit. Especially the
transformer and under the plastic frame.
Thank You
Quenton Kilgore
7470 8th Ave.
Nampa, ID.
83686
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of gulftech@xxxxxxxx
Sent: Wednesday, September 19, 2001 8:28 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Sony KV-27TS27
Check for leaky C613, .047 ufd, 400 volts. Also, check C650 & D622.
You said you replaced Q601 & Q602. Hopefully, you didn't use an ECG or
NTE.
Ken Smith
Gulf Technical Services
3034 Gulf Breeze Parkway
Gulf Breeze, FL 32561
850-934-8324 (Voice) 850-932-0819 (Fax)
---------------------
On Thu, 20 Sep 2001 08:32:40 +0800 "ACT Electronic Center"
<act@xxxxxxxxxxx> writes:
> Hi can anybody suggest a tip on the unit?
>
> The unit is dead.
>
> I have replaced the transistors
> C4664 x2
> Fuse.
> unit is ok, but after 3 days, the unit break down again.
> I have replaced another transistors but still, the unit went dead,
> it is destroying parts.
>
> Pls. Help.
>
> Dennis Co
> act@xxxxxxxxxxx
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
