Thanks to Bob Waterman, and Tiberio Moreira, for helping me wirh rhis TV. The Fix was replacing an "Open" R551 Randy Evans VCR SERVICE Delta, Ohio 43516 Gemini Computer & TV <geminitv@xxxxxxxxxxx> wrote: --------------------------------------------------------------- Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- SONY KV27TS20 Pincushion Bad. Picture Bowed In On Both Sides. Robinson Electronics Check Q502, Found Solder Splash Shorting E-C Of Pin Amp Xstr Q502. --------------------------------------------------------------- SONY KV27TS20 Pincushion Problem Ela R551 Open (47k Ohms) --------------------------------------------------------------- SONY KV27TS20 Pix bowed in on sides Dale Kemp L511 open (repairable) --------------------------------------------------------------- SONY KV27TS20 Pix Bows In After Warmup Stagalee C550 --------------------------------------------------------------- Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx Date:Fri, 3 Jun 2005 21:24:33 -0400From:"tibstv" <tiberiom@xxxxxxxxx> To:techassist@xxxxxxxxxxxxxxxxxxxx:[TechAssist] Re: Sony KV-27TS20 No Pincushion Correctioncheck these Q502 R551 ( 47k ) L511 C550=20 tib TibsTV Tiberio Moreira 412 Lancaster St. Leominster Ma. 01453 Master Liscence # 9176 978.537.5973 (Fax) 978.840.3516 tiberiom@xxxxxxxxx tibstv@xxxxxxxxxxx ----- Original Message ----- From: "Randy Evans" To: Sent: Friday, June 03, 2005 6:03 PM Subject: [TechAssist] Sony KV-27TS20 No Pincushion Correction This set has absolutely no Pincushion Correction. The Pincushion Controls have no effect whatsoever. I saw a Tip that said to check D518 & R587 but they check good. I also checked L510 Horizontal Centering Coil and I didn't see any sign of overheating. I pulled the board for static testing because I don't have the schematic. The yoke was making a frying sound when I had the set powered-up, but I'm not sure if that is related to my problem or not? If somebody has any notes for this problem on this set, I would appreciate some advice. This thing is a 1989 model, so I guess I could expect just about anything could be bad! Thanks in advance! Randy Evans VCR SERVICE Delta, Ohio 43515 --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/