Peter, From Tech Repair CD: SONY\KPR46EXR15\Convergence bad* will not adjust.\\\\Replaced IC1704 and 1705 (STK4278L)* R1729*R1808 R1727*R1811 (all are\part # 121479200)*L904 (145931300) and 3.15a fuse.\\\\\\\ Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Peter W. Blakeman" <pwblakeman@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 04, 2003 2:02 AM Subject: [TechAssist] Sony KPR-46EXR15 Convergence Problems This Sony KPR-46EXR15, Chassis SCC-F19E-A came in with a severe bending of the raster in the lower left quadrant. I found F902 on the convergence board blown. I replaced IC905, STK4278L and the fuse. I turned the set on and both fuses blew. Should I have replaced both STK's? Any other componets that could be faulty? TIA, Peter Blakeman Blakeman Electronics Tyler, Tx ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/