[TechAssist] Re: Sony KP-41T65, general convergance question.

This is a 1998 model with Digital Service alignments.  Actually 25% is
too high.  I should have said about the last 10% that curls up, or 1
square of the cross-hatch pattern.  I can adjust it out, but the
convergence gets screwed up worse elsewhere.  I remember that the older
Hitachi's had one adjustment that would adjust just the tail of the
line.  I forget what it was called.   

Kevin Wilks
Kevin's TV & Video Repair
Penticton BC Canada
kevintv@xxxxxxx 
 

-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of
damon101@xxxxxxxxxxxxxx
Sent: Sunday, January 30, 2005 4:22 AM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: Sony KP-41T65, general convergance question.

Are these the Pot controls or the Digital Service alignments?? 25% is a
lot
of the picture and I suspect you have a couple pots maxxed if they are
pots.......
Or the digital control no longer adjusts....

Careful here.....but I think there's a way to turn off the convergence
board
for proper centering....I don't think it's [7 enter]...IF YOU PRESS
[7enter]
and it says INI......DON'T!!!

You will end up having to align all 3 tubes....just let it time
out....or
hit power.
There is a disable button, just not sure what the procedure
is.......Especially on the T series.....old enough to be a pot type, new
enough to be a digital type....

Damon Brunger
Telrad Electronics
Fort Wayne IN
----- Original Message -----
From: "Kevin" <kevintv@xxxxxxx>
To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
Sent: Saturday, January 29, 2005 11:32 PM
Subject: [TechAssist] Sony KP-41T65, general convergance question.


> I just did the convergence on a Sony KP-41T65 and could not get
perfect
> convergence using a cross-hatch pattern generator.  A couple of the
> lines were straight from the right all the way over to the left until
> the last 25% where it curled up, and much effort only made it worse.
> The frustrating thing is it is only on one line.  Any suggestions?
>
> Second question, same set:  After changing 1 tube, how long should it
> take to convergence the set?  This one took over 4 hours in the
> customer's home with him "helping" me.  Thanks.
>
> Kevin Wilks
> Kevin's TV & Video Repair
> Penticton BC Canada
> kevintv@xxxxxxx
>
>
>
>
>
------------------------------------------------------------------------
--
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
>
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Anti-Virus.
> Version: 7.0.298 / Virus Database: 265.6.9 - Release Date: 1/6/2005
>
>



------------------------------------------------------------------------
-----
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: