Something is causing the display micro to latch up. this could be the IC itself or a vdd problem. Also check to see if the oscillator continues to operate when the display goes haywire. All these will help isolate the source of the problem. Good luck and happy hunting. Jim McVey McVey Alltronix 327 Broadway Newburgh Ny 12550 ph: 845 561 8383 fx: 845 561 9017 Consumer electronics & computer service. Factory authorized for over twenty brands. ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Monday, November 24, 2003 2:33 PM Subject: [TechAssist] Sony CDF-ZW150, min-stereo, LCD display is unreadable after warming up. > This Sony mini stereo system's display will work fine for a few minutes. > Then after it warms up the display is unreadable as all the LCD's in the > display light up. What could cause this? TIA > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/