Does the replacement lamp module come complete with these replaced parts as a complete assy? Phil Bader Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx Dale Lubow wrote: >I have been working on this Sharp XG-E850U LCD Projector for awhile. >It came in with the lamp not lighting. I found IC1702 on ballast pwb >shorted between pains 2-3 & 9. Replaced the IC and it worked the first >time but after shutting the unit off it wouldn't start the lamp again >& the IC1702 shorted the same way again. I talked to Sharp and the >told me to also replace T1703 ignitor. So I replaced T1703 & IC1702 >and the lamp came on for about 5 seconds and the it went out shorting >IC1702 again. I did find the ESR on C1725 a little high but looking at >the schematic I don't see how this would cause IC1702 to short out. >Any help would be greatly appreciated appreciated. > >TIA, >Dale >--=20 >Dale A. Lubow CET >Harris TV & Appliance >335 Lincoln Way >Ames, IA 50010 >515-232-1109 (Voice) >515-232-3356 (Fax) >HarrisTV@xxxxxxxxx >----------------------------------------------------------------------------- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/