Sorry it was sent without a signature If someone has a diagram for this TV I would appreciate it. I believe it was struck by lightning. I found the surface mounted EEProm IC2102 shorted. I unloaded the circuit and the standby voltage came up on the micro and the vcc land for the eeprom. I ordered a eeprom and put it in today. The tv comes on, tunes, and has sound but the vertical centering is off, the top part of the scan is short with some retrace, color is horrible, width is short with alot of pincusioning on left side, the right side has slight bend but not bad. I have 5v on pin 8 if eeprom vcc and the data/clock lines only have 3.6v. Don't know if this is normal for this set but not usually normal for others. The eeprom doens't have the same marking at the old one but I looked it up on Tritronics website by model number and that was what I ordered. Any advice and or a schematic would be great. Thanks Jason Moutons Electronics ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/