[TechAssist] Re: Sharp 25j m100

James,
Look for diodes with ferrite beads on them. Use hot glue gun to secure them.
Or you have an open trace or solder splash.
I don't have any tips for your model, so hopefully this is all it is.
Jeff

FAX 1-413-280-0677
Jeff Dougherty **Vacation 8/27 to 8/30**
Intrepid Video & Electronics
501 Luther Rd
Harrisburg, PA 17111
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com


----- Original Message -----
From: "James M. Knoble" <jmk1938@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, July 29, 2001 11:57 AM
Subject: [TechAssist] Sharp 25j m100


>
> High piched noise that comes and goes. flexing the board near the flyback
> changes the noise.Moving the flyback itself has no effect.
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://geocities.com/circuit_work/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://geocities.com/circuit_work/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: