[TechAssist] Re: Sharp 13VT-K100M powers up then shut down. Have done alignment...
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 19 May 2004 12:35:24 -0400
Try the mode switch.
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
----- Original Message -----
From: "Walt" <avsgi@xxxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, May 19, 2004 7:43 AM
Subject: [TechAssist] Sharp 13VT-K100M powers up then shut down. Have done
alignment...
> Hello Fellow Techs, have a Sharp 13 inch combo tv/vcr. the set comes on
just along enough
> to put a tape in and then ejects out then shuts down.If a tape is not
inserted within a
> period of time will power off which thought may been alignment. Have done
a deck
> alignment. The video cylinder rotates pinch roller engages but the capstan
does not
> rotate. have checked the capstan motor and it is good. Do not have a
schematic for this
> unit so wonder if someone may know of a solution to problem.
> Thanks,
>
> --
> Walter....
>
> Audio Video Service of Granville, Inc.
> 2106 Sunset Road
> Oxford, N.C. 27565
> 919.693.1066
> www.audiovideoservice.com
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
