Open 29-39K ohm 1/2 w. resister coming of regulated 130 vdc source to provide 33 vdc to tuner.On most of the Sanyo's its on the right side under a group of power resisters,if tuner is on the left side.(from rear)HTH Country TV Ron Miller Inez, TX. 77968 ----- Original Message ----- From: "hivolts" <hivolts@xxxxxxxxxxxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Sunday, June 20, 2004 5:16 AM Subject: [TechAssist] Sanyo DS25390 looks like tuner problem > Ok let try this one more time lol.when this set came in I had sound but no pic just what looks like herring boning.I have change the tuner and the ant block because some one had tried to do a make shift repair.but I still have some what of the same problem.but I did notice when I went to autoprogram the set is now says no signal on either air or cable.I do not have the manual for this one.but I do have 12 volts and 5 volts at the tuner assy I think it may be a chip but not sure. > thanks > Chuck Staples > Staples TV > Phippsburg Maine 04562 > > hivotls@xxxxxxxxxxxxxxxx > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/