I don't know about that model but most need 33v going to the tuner somewhere or a variable tuning voltage. Do you have snow? You may need 12v at two places. One to power the mixer and one to either vhf lo, vhf hi, uhf, cable. Russ Hoyt Hoyt's TV Exeter, NH ----- Original Message ----- From: "hivolts" <hivolts@xxxxxxxxxxxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Sunday, June 20, 2004 6:16 AM Subject: [TechAssist] Sanyo DS25390 looks like tuner problem > Ok let try this one more time lol.when this set came in I had sound but no pic just what looks like herring boning.I have change the tuner and the ant block because some one had tried to do a make shift repair.but I still have some what of the same problem.but I did notice when I went to autoprogram the set is now says no signal on either air or cable.I do not have the manual for this one.but I do have 12 volts and 5 volts at the tuner assy I think it may be a chip but not sure. > thanks > Chuck Staples > Staples TV > Phippsburg Maine 04562 > > hivotls@xxxxxxxxxxxxxxxx > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/