This set came in dead... Replaced Q601 Q604 Q605 and D612 optic coupler..No other parts found bad.. {I thought} Plugging into varac at 90V heard degaus relay click a few times..Then I turned set on it looked perfect {90V} monitoring B+ at C628 it was around 126V.. Increasing AC to 120V still everything looked great and B+ went to 129V..Turning set off voltage went to 265V on C628 B+ cap and it vented big time..Checked parts already replace and they seem to be ok, did not plug in again after replacing C628.. So if anyone has a print on this it would be greatly appreciated. Thanks.. Bob, Bobs TV Worcester, ma woodman1@xxxxxxxx Main 508-853-1482 Fax 508-853-1480 ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/