just a note,,we also have had complete bad batches of str30130,,,what a pain art bevilacqua wrote: > I know exactly what this is - you've got a bad "new" STR30130. We've had > this problem on several sets, with the output voltage varying depending > on set (load). When I realized what the problem was, I sampled all of > the STR30130's that I had on hand, and 90% were bad. Unfortunately, more > than 90 days had passed, and the distributor wouldn't make it right. > > The topic of bad batches of STR30130 from one or two distributors has > been heavily discussed on several forums, and is a well known problem. > > Get another chip from a different source. > > art > > Art Bevilacqua > Essex Radio and TV > 40 Main Street > Essex, MA 01929 > abevilac@xxxxxxxxxxxxx > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Patrick Fugere > Sent: Wednesday, November 28, 2001 6:25 PM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Sanyo AVM-2595U - bad regulation. > > Hi, > > Sanyo AVM-2595U with bad regulation. > Received the set dead. HOT was short so I replaced it. Now it goes on > but > very bad regulation. The brighter the screen gets the smaller and more > distorted the image is.(squeezed pin). > I replaced IC001 ( STR30130 ) and still the same . So I replaced the > nearby > cap C007 and no dice. > > What else could be causing this. The original HOT is D1879 but I > replaced > it with one I had in stock which has similar specs D1880. Could this be > it? > I would doubt it but... > > Any help appreciated. > > Patrick Fugere > F u j i s t i c s > Montreal, Canada. > p_fugere@xxxxxxxxxxxx > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe