[TechAssist] Re: Samsung VCR Model VR-8805C
- From: "Jerome Silverman" <greentron@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 11 Jun 2004 16:06:21 -0400
Not familiar with that model, but aside from reel drive problems, I recall
one Samsung where the take-up reel brake arm was warped and not holding, so
tape spilled out of the take-up reel after the supply reel finished
tightening up the tape.
Jerry Silverman
Greentron Inc
4 Newland Ave Greenville SC 29609
864 232 3889 Fax 271 2080
greentron@xxxxxxx
----- Original Message -----
From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, June 11, 2004 3:52 PM
Subject: [TechAssist] Samsung VCR Model VR-8805C
> Anyone know a reason this VCR leaves a tape loop inside the VCR, when
> ejecting?
> Almost like the JVC with the dirty Mode Switch. But I can't find a Mode
> switch on this unit. Is there one?
>
> TIA
>
> -Ed-
> Tel-Tek Electronics
> Ontario-Canada
>
> teltek3@xxxxxxxxxxxx
> Ask me about the Tech Repair CD.
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
