[TechAssist] Re: Samsung PTV model HCL4715w...Convergence

I didn't get the others because I don't know if they are 'A' versions or not.
BTW,it turns out the BP95-00155A is the PCB,so I may have to go that route.
Also,MCM is researching for me if their STK392-040 is an 'A' Version.They
should call me today.
I've had great luck with every TT- I've purchased.I don't think it's the 
TT- that's the problem,I think it's the 'B' version(although I got an email 
from the group yesterday saying they didn't think there was a difference in 
the A or B versions,I'll let you know)

Peggs


At 04:17 PM 12/1/04, Damon wrote:
>Well 1st, you get what you pay for....why didn't you just buy the
>29305133(Toshiba) $30.40??
>Or try MCM for STK392-040s I steer clear of the TT's myself.
>
>
>Damon Brunger
>Telrad Electronics
>Ft. Wayne, IN
>----- Original Message -----
>From: "peggs" <peggs@xxxxxxxxxxxxx>
>To: <techassist@xxxxxxxxxxxxx>
>Sent: Wednesday, December 01, 2004 4:02 PM
>Subject: [TechAssist] Samsung PTV model HCL4715w...Convergence
>
>
> > Wide Screen HDTV monitor TV.
> > Red Convergence bowing.
> > ICZ104 is an STK392-040.
> > I had an STK392-020 in stock,so I installed it to confirm that ICZ104 WAS
> > bad......and it was.
> > Searching model HCL4715,Tritronics had what they called a 'Convergence
> > Board', AA95-00706C, $117.01 (my cost).Which subbed to a BP95-00155A
> > $80.86.
> > Are these STK392's or is it the entire PCB(which includes Flyback) ???
> >
> > Anyway,I searched Tritronics for an STK392-040,$14.89.....subs were
> > TT-STK392-040(misc) $12.89
> > 29305133(Toshiba) $30.40
> > C5AA00000107(Panasonic) $28.31...... needless to say I ordered the
> > TT-392-040, $12.89.
> >
> > You guessed it,after installing it there were what looked like Green
> > convergence problems.
> > Re-installed the -020,and Convergence is Good again.
> > After closer inspection,the OEM is marked on the back of the Chip,392040A
> > The one I ordered from Tritronics is 392040B,and the -020 I had in Stock
> > is
> > marked 392020A..............the -040A must be what I need.
> >
> > The Datasheets show there IS a difference in the -020 and -040.Higher
> > Current Rating(I) and Scanning Rates/Frequency for the -040.
> > It appears the -040 is used because of the higher HDTV Scanning
> > Rates/Frequency(s).
> >
> > I'm sure you already know my question,and I'm sure I already know your
> > answers..... :-))
> > I'm trying to get around buying that $80 OEM......by using a Generic -040A
> > version.
> > Where can I get one ???
> > Has anyone been down this road with this model Samsung ???
> > I'm curious if the OEM 'Sub' (BP95-) is yet another version of this STK392
> > ???
> > Service bulletins ???
> >
> > Peggs
> > Peggs' Electronics
> > 1519 West 2nd Street
> > Owensboro,KY 42301
> > 270-926-4968
> > fax 270-686-7399
> > peggs@xxxxxxxxxxxxx
> >
> > --
> > This message has been scanned by the OMU Online postini filter.
> >
> >
> > 
> -----------------------------------------------------------------------------
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > http://www.freelists.org/archives/techassist/
> >
> >
>
>
>
>-----------------------------------------------------------------------------
>Lost Password:
>http://www.tech-assist.org  and select "Login Problems?".
>Email Archives:
>http://www.freelists.org/archives/techassist/

--
This message has been scanned by the OMU Online postini filter.


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: