This PTV came in with severe convergence problem. Heatsink for the three convergence IC's was cold. Found fuse F855 blown. It supplies the convergence board with -26V. Replaced fuse and all three IC's (STK 391-020). Powered up and instantly blew the fuse again. Have checked both neg and pos 26V loads for shorts, found none. Checked all three convergence yokes, all read about 1 ohm. The neg and pos 26V supplies only feed the three IC's. Have checked all caps on both supplies, OK. Any ideas? TIA Jerry Hoeme Jerry's TV Service (Estab. 1978) 840 S. Kansas Ave Liberal, KS 67901 jhoeme@xxxxxxxxxxxxx For Professional Techs only ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/