Check CRT driver IC on the CRT board, flyback, or possible intermittent arcing CRT. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: "tech" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, July 27, 2005 12:57 PM Subject: [TechAssist] SONY KV-27V42 Chassis BA-4D 4 blinks on front This set blinks 4 times when tried to start up. I found the horz. output shorted (Q502) I am wondering if there is anything else in this set that will cause Q502 to short. I found no loose connections or bad solder. Any info would be great. Thank you. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ---------------------------------------------------------------------------- - This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/