[TechAssist] Re: SONT TV - KV-36FV1 Bad Colors on pix tube
- From: Kevin <kevintv@xxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 04 Jun 2004 21:24:57 -0700
Well, it's about time! I need the work.
Kevin Wilks
Kevin's TV & Video Repair
Penticton BC Canada
kevintv@xxxxxxx
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Al Gutz
Sent: Friday, June 04, 2004 7:53 PM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Re: SONT TV - KV-36FV1 Bad Colors on pix tube
When that occurs all the TVs will need to be reconverged, lots of work.
Scienctists who study that sort of thing claim its several thousand
years overdue but they feel with recent changes in magnetic field it may
be in the process now.
Al G
Technotronic Dimensions wrote:
> Just dont do it while the Earths Magnetic Field is Changing Polarity,
then
> you'll have a recall later.
>
>
> Steve Hearns
> Technotronic Dimensions, NY [USA]
> WWW.TECHNOTRONIC-DIMENSIONS.COM
> 1-877-817-9885 (Voice / Fax Toll Free - US Only)
>
>
> ----- Original Message -----
> From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, June 04, 2004 7:16 PM
> Subject: [TechAssist] Re: SONT TV - KV-36FV1 Bad Colors on pix tube
>
>
> Geezers are valuable again.
>
> Russ Hoyt
> Hoyt's TV
> Exeter, NH
>
>
> ----- Original Message -----
> From: "Max Bonnell" <mebonnell@xxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, June 04, 2004 10:40 AM
> Subject: [TechAssist] Re: SONT TV - KV-36FV1 Bad Colors on pix tube
>
>
>
>>I never thought I would see the day when we were teaching how to use a
>>degausing coil.
>>
>>Max Bonnell
>>Bonnell TV
>>Robinson, IL
>>
>>
>>Sender: techassist-bounce@xxxxxxxxxxxxx From:
>>hoytstv@xxxxxxxxxxx(Hoyt's=A0TV) Date: Fri, Jun 4, 2004, 9:22am
(CDT+1)
>>To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: SONY TV -
>>KV-36FV1 Bad Colors on pix tube. Reply=A0to: techassist@xxxxxxxxxxxxx
>>
>>I haven't used a pencil degausser since the last 8 track came in. How
>>long does it take to cover the whole screen on a 36" TV? I tried to
>>paint my father's house with a crayon once. (4 hours)
>>
>>Russ Hoyt
>>Hoyt's TV
>>Exeter, NH
>>
>>----- Original Message -----
>>From: "Damon" <damon101@xxxxxxxxxxxxxx>
>>To: <techassist@xxxxxxxxxxxxx>
>>Sent: Friday, June 04, 2004 7:38 AM
>>Subject: [TechAssist] Re: SONY TV - KV-36FV1 Bad Colors on pix tube.
>>OK, now everyone knows how to use the Big degausser....I can just see
>>you pulling out the recommended Sony Pencil Wand and doing your little
>>dance.....
>>
>>Damon Brunger
>>Telrad Electronic Services
>>Ft Wayne, IN 46815
>>
>>----- Original Message -----
>>Subject: [TechAssist] Re: SONY TV - KV-36FV1 Bad Colors on pix tube.
>>| Me to. Thats the way I saw taught, before dirt was invented. | Jerry
>>|
>>| Alpha 21 Electronics
>>| www.alpha21century@xxxxxxxxxxxxx
>>|
>>| ElectronicRepairServices <ElectronicRepair@xxxxxxxxxxxx> wrote:
>>
>>| I called the costumer and asked him when and how did this happened
and
>>he | told me that it happened during a storm. | Electronic Repair
>>Services
>>||
>>
>> ----- Original Message -----
>>| From: "Hoyt's TV"
>>| Sent: Wednesday, June 02, 2004 7:26 PM | Subject: [TechAssist] Re:
>>SONY TV - KV-36FV1 Bad Colors on pix tube.
>>|
>>
>>| > The way I learned to do it, back in the stone age, was to start 6
>>feet | away
>>| > from the front with the coil perpendicular when you turn it on.
Then
>>turn
>>| it
>>| > sideways and with a circular motion bring it up to the tube,
>>covering all
>>| > the tube then back off the same way and turn it perpendicular
before
>>| turning
>>| > it off. Not necessary to do the sides and back unless you suspect
>>some | metal
>>| > there, got magnetized.
>>|=A0>
>>| > Before the advent of automatic degaussing, we had to degauss every
>>time we
>>| > moved a set because it was the movement through the earths
magnetic
>>field
>>| > that magnetized the shadow mask. That wasn't strong enough to have
>>much | > affect on the shields but telephone bells and vacuum cleaners
>>would do a | job
>>| > on them. (I remeber that Russ)
>>|=A0>
>>| > Russ Hoyt
>>| > Hoyt's TV
>>| > Exeter, NH
>>
>>
>>| > ----- Original Message -----
>>| > From: "Bruce Tiedeman"
>>| > To:
>>| > Sent: Wednesday, June 02, 2004 3:40 PM | > Subject: [TechAssist]
Re:
>>SONY TV - KV-36FV1 Bad Colors on pix tube.
>>|=A0>
>>|=A0>
>>| > > Russ , I leave the set on. Put the Degaussing coil in front of
the
>>tube
>>| > and
>>| > > energize the coil . Move the coil in a circular motion in front
>>and | around
>>| > > cabinet sides, bring the coil around front again moving it away
>>from the
>>| > > tube as you go. I then turn off the coil and abruptly turn the
>>coil | > > perpendicular to the set .
>>| > > That's it, works good unless set has been dropped. If the set
has
>>been | > > dropped or hit by lightning may take a lot more work.
Repeat
>>the | > procedure.
>>| > > Some times the degaussing circuit malfunctions and you have to
>>repair. | > >
>>
>>Bruce
>>|=A0>=A0>
>>| > > .B&T Electronics
>>| > > ----- Original Message -----
>>| > > From: "Hoyt's TV"
>>| > > Sent: Wednesday, June 02, 2004 3:05 PM | > > Subject:
[TechAssist]
>>Re: SONY TV - KV-36FV1 Bad Colors on pix tube. | > > > I've been using
>>that big black horse collar for over 40 years, and | > haven't
>>| > > > lost a patient yet.
>>|=A0>=A0>=A0>
>>| > > > If you do something stupid like turn it off while it's next to
>>the | tube,
>>| > > it
>>| > > > will magnetize the shadow mask so it looks like it needs to be
|
>>
>>>degaussed.
>>
>>| > > > Sometimes enough so it takes a lot of degaussing to undo what
>>you
>>did.
>>|=A0>=A0>=A0>
>>|=A0>=A0>=A0>
>>
>>| > > > Russ Hoyt
>>| > > > Hoyt's TV
>>| > > > Exeter, NH
>>
>>| > > > ----- Original Message -----
>>| > > > From: "ElectronicRepairServices" | > > > To:
>>| > > > Sent: Wednesday, June 02, 2004 2:15 PM | > > > Subject:
>>[TechAssist] SONY TV - KV-36FV1 Bad Colors on pix tube. | > > > > I
have
>>to go on a service call on this TV, the costumer says that | the
>>| > > > colors
>>| > > > > are bad, sounds like the degausing is bad on this TV, it
could
>>be
>>as
>>| > > > simple
>>| > > > > as resoldering the degausing thermistor.
>>| > > > > My question is, and I have heard conflicting reports, could
I
>>use
>>| the
>>| > > hand
>>| > > > > held degausing coil to degause the pix tube, some servicers
>>say
>>that
>>| > > could
>>| > > > > damage the pix tube.
>>| > > > > Thank you, Mark
>>----------------------------------------------
>>
>>
>>----------------------------------------------------------------------
----
>
> ---
>
>>Lost Password:
>>http://www.tech-assist.org and select "Login Problems?".
>>Email Archives:
>>//www.freelists.org/archives/techassist/
>>
>
>
>
>
>
------------------------------------------------------------------------
----
> -
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
>
>
------------------------------------------------------------------------
-----
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
------------------------------------------------------------------------
-----
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
