These sets and the 140 chasis were notorious for bad connects. The place that normally causes the described problem is the small substrate diode board on the left hand side of the main board just behind the flyback. It sits just behind two big caps. Pull board and resolder all connections. Check the dioides on the board and the two big caps in front of it. Hope that helps. ----- Original Message ----- From: "john lyle" <johnlyle@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, September 19, 2001 2:00 PM Subject: [TechAssist] RCA ticking sound > > Still working on RCA model grm814h chassis ctc-130a/b/c, set doesn't > start up just ticking sound. Any suggestions, don't have schematics, any > help! > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.