hi techs. I have had worked a few of these RCA mod# F19430 sets that were dead. normally the reg is shorted . But with this one the reg is good , and you can hear the power supply start up when you plug it in.when I switch it on all happens is the degaussing relay cuts in for a few secs but nothing else . it has the 5v for the eeprom and the sys control . this set carries a GCT841B ic for the signal and deflection and I am not familiar with this ic. can any one tell me if there is suppose to be a standby voltage on this ic , or Evan the pin out for this . ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/