[TechAssist] Re: RCA combo T19060GY, no filament...
- From: "david" <stex@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 3 May 2002 08:32:19 -0500
Seems from what I have read.....check the video drivers on the main then on
the crt board.....sounds like the video drivers are not turning on.
David.
-----Original Message-----
From: techassist-bounce@xxxxxxxxxxxxx
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Terry H.
Sent: Friday, May 03, 2002 7:24 AM
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] RCA combo T19060GY, no filament...
I know 'no filament' is oversimplifying. Unit has HV, sound and vertical.
Everything including video amps are operating like everything is fine, but
no raster. Had good video once for 10minutes or so, then went out. Tried to
be clever and floated the heater pins and did the wrap around the fly core.I
had 1/4 screen but smeary at that. Changed the fly, but nothing. Checked
continuity from the fly out and it's good. Of course no prints so could use
a pointer or maybe a scan of the sweep circuit. Man I hate these. Any help
appreciated. Thanks.
Terry H.
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
