[TechAssist] Re: RCA chassis MMC102G

Unit is so new, no reported complaint recorded. Here's what I have on this
unit:

Subject: Chipper Check Users...Urgent Bulletin from Thomson...Please Read..
 From: "Batman" <BurrOakTV@xxxxxxxxxxx>
Newsgroups: techsweb.tv

Just received a "Important and Urgent" message from Thomson, specificially
from Michael Begala, Manager, Product Technical Services...it goes as
follows:
Subject RCA/ProScan MM102G chassis involving the following models:MM27110
PS27810
       MM32110 PS32810
       MM36110 PS36810
       MM52110 PS52810
       MM6110 PS61810

DO NOT USE CHIPPER CHECK ON THESE INSTRUMENTS UNDER ANY CIRCUMSTANCES UNTIL
FURTHER NOTICE!!!
Make all instrument parameter adjustments via the front panel service mode.

This warning includes the above models or any MM series model that ends with
a "10" or chassis version whose letter ends with a "G".

"Use of Chipper Check could result in catastrophic register data errors that
are unrecoverable at this time. Will advise you when new Chipper Check code
will be available."
Gonzalo N. Arrivas, CET Pittsburg, CA
http://www.etechhelponline.com
Tel/Fax: 925-432-2057


----- Original Message -----
From: "James M. Knoble" <jmk1938@xxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, July 30, 2001 4:58 AM
Subject: [TechAssist] Re: RCA chassis MMC102G


>
> RCA
> Model MM52110
> CHassis  MMC102G
>
>
>
> At 10:01 AM 7/29/2001 -0700, you wrote:
> >
> >James,
> >
> >If you can post the model number, perhaps I have some tips on it.  On
some
> >RCA I file under model number. I don't have tech notes on MM102. Thanks.
> >
> >Gonzalo N. Arrivas, CET Pittsburg, CA
> >http://www.etechhelponline.com
> >Tel/Fax: 925-432-2057
> >----- Original Message -----
> >From: "James M. Knoble" <jmk1938@xxxxxxxxxx>
> >To: <techassist@xxxxxxxxxxxxx>
> >Sent: Sunday, July 29, 2001 8:53 AM
> >Subject: [TechAssist] RCA chassis MM102
> >
> >
> >>
> >> Hello all:
> >> set will turn off and then turn back on intermittently.also happens
with
> >> the xrp disconnected.micro is triggering the set to power down,then
power
> >> up again.
> >>
> >> Help make your TechAssist online repair tips
> >> database better!  Submit your fixes here:
> >> http://geocities.com/circuit_work/tip/#tips
> >> To unsubscribe write to:
> >> techassist-request@xxxxxxxxxxxxx
> >> with  unsubscribe  in the subject line.
> >>
> >
> >Help make your TechAssist online repair tips
> >database better!  Submit your fixes here:
> >http://geocities.com/circuit_work/tip/#tips
> >To unsubscribe write to:
> >techassist-request@xxxxxxxxxxxxx
> >with  unsubscribe  in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://geocities.com/circuit_work/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://geocities.com/circuit_work/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: