[TechAssist] RCA VR503 skipping teeth


       Good evening...it's SNOWING in Penna!...
I am trying to do a repair on this  RCA VCR VR503 (similar to VR501A, VR327, 
VR603HF) and have already replaced the cassette in assy and it was returned 
by the customer with the thing still skipping teeth when loading the 
cassette. I have seen repair tips for this problem that say 'replace snapped 
chassis lock on right side with p/n VVDS0017 . and... 'small white nub broken 
off' rejplace with VVDS0017
i ordered one of these and rec'd a threaded piece with a nut.
Now I am not sure where it goes
i thought it was part of the brake slider underneath but apparently not. 

Can anyone describe this repair?
Is it on the chassis deck  itself? Where is the white nub or maybe i should 
ask where was it?

Craig Myers
Myers Electronics
York, Pa

'always do what you are afraid to do" Ralph Waldo Emerson
*****************************************************************************
Add a known good Tech line number or part supplier in The 
Tech Address Book.
http://www.tech-assist.org/secure/tip/contact.html
*****************************************************************************
Submit A Repair Tip Here, or Change/Remove your Email Address:
        http://www.tech-assist.org/secure/tip/main.html
*****************************************************************************
For automatic password retrieval 24 hours a day, go to:
http://www.tech-assist.org  and select "Lost your Login Info?".
*****************************************************************************
Access the archives here:
http://www.freelists.org/archives/techassist/
*****************************************************************************

Other related posts: