First thought is to check the setup and make sure it is not locked in a play only mode. Second thought is to check the tab signal at the micro. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 greentron@xxxxxxx ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, June 18, 2004 2:33 PM Subject: [TechAssist] RCA VCR VR250 > Have a problem on this unit after repairing numerous mechanical > problems, belts etc. > When tape is inserted with Safety tab in place, will > automatically go to the play mode. Can not get it into the Record Mode. > I have checked the Safety switch on the basket, and it is working > properly. But it's acting as though it's not. Same symptoms. > Any ideas, anyone? > > -Ed- > > Tel-Tek Electronics > teltek3@xxxxxxxxxxxx > Ontario-Canada > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/