as one who has screwed up at times, I can tell you, get a schematic,then fix one problem at a time starting with raster. Good luck, and get the magnifier and check for cracks and open foils, no matter how well you think your eyesight is. A sig file would get you more help. al ----- Original Message ----- From: "john lyle" <johnlyle@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, September 13, 2001 4:46 PM Subject: [TechAssist] RCA TUNER PROBLEM, GRM814H, CTC-130A/B/C CHASSIS > > While checking a friends tv for intermitted fuzzy picture, hit tuner > and this fixed the problem. I made the mistake of unplugging the tuner > while the set still had power, which caused r120 10 watt power resistor > to open. It also caused the horizontal transistor and fuse f101 to blow. > I have replaced all parts that I know are bad and the set won't power up > makes a ticking sound. Could the tuner be causing my problem? I remember > some of these used power from tuner to start up. Don't have schematics, > help if you can please! > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.