[TechAssist] Re: RCA PJR500SR
- From: "Bill S" <billans@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 11 Dec 2001 16:17:20 -0800
Hi Neil
Ummm did this set get hit by lightning??? I find it fascinating that the
set will shut down immediately if you hook the antenna to it.... I think
your having a problem with a blown safety caps in your isolation circuits
and maybe taking care of that problem (safety wise) will allow you to get
some better handle on the regulation..... I would think if you were to take
a meter and measure between the ground of the antenna cable connector and
the RF shield connector, I'll bet you get some wild voltages.
just a two bit thought
Happy Holidays
Bill
----- Original Message -----
From: <tvdoctors@xxxxxxxxxxxxx>
To: <Techassist@xxxxxxxxxxxxx>
Sent: Tuesday, December 11, 2001 12:51 PM
Subject: [TechAssist] RCA PJR500SR
> Still having problems with this set. Shuts down within 2 to 3 minutes
after turn on. If I hook an antenna to it after turn on I dont have to wait
2 to 3 minutes for the unit to shut down, it shuts down immediately. Checked
Voltage reg. (IC901) and it was on 110 volts until set shuts down, then
jumps to around 135. I changed the reg. and it still does it. I noticed on
the deflection board that diode D708 was missing (looks like someone took it
out) I don't know if it's supposed to be there or not. Any help would be
appreciated, Thanks Neil
>
> TV Doctors 108 W. Main St. Monroe,Wa. 98272 360-794-6469
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts: