Hi Guys, this set was initially dead, main fuse, HOT & Flyback were changed and set came up but now has typical bowed convergence problem, customer claims set had no convergence issues before set died. I checked the Convergence pwr. supply board plug and the only voltage I had was the +24, installed a rebuilt 250686 and the set came up with convergence still bowed, heres the odd part, If I go into the cust. menu and pull up convergence and choose red or green adjustment, the set does not go to a cross, the entire screen goes black, the audio quits, there is a soft click or pop in the speakers and then the set pops back on with a perfectly converged picture and good sound??? It`s like the entire set is turned off and immediately back on but I don`t hear the HV collapsing just that soft click. once it comes on with a good pix/audio I can go into convergence set-up and the cross is there and it is adjustable, set may go bad in 20 seconds or may run 20 minutes but shutting off set for 5 minutes or trying to run for long periods of time will cause convergence failure, ANY IDEAS? worked on a lot of 195`s never seen or heard of anyone having this problem, sorry for the long post, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/