That is the correct part number per PartsFinder. Good luck with your problem though, no idea on that. The Old Master Technician ******************************** Since 1972 * Jim Myers * Telrad Electronics * Fort Wayne Indiana * ******************************** Gary Pahls wrote: > The Service number for this unit is D52W17BYX1 > When this set came in it would randomly turn itself on an off, ordered new > small signal board, the set runs fine now but the geomety is way off. Can't > get it to fill the screen horizontally, vertical is close. We went through > the set up proceedures that came with the new panel but no results. Tried > swapping all 4 eprom IC's, no results, tried a second board, no results. Can > someone tell me if the part number 264120 is the right small signal panel for > this set, and if so what are we missing. It almost appears that this panel > is for a 4X3 instead of a 16X9 set. We have changed the parameters on the > new board for widescreen. When I switch the aspect ratio from 4X3 to 16X9 I > don't notice any significant change. This is the first one of these I've > seen so I am probably just missing something. > > TIA > > Gary Pahls > Beloit Entertainment Center > bec@xxxxxxxxx > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search engines. > Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/