check crt board and plug from crt to main board where it goes into flyback you will find cold joints Andrew Rose Action TV. Holbrook ny. ----- Original Message ----- From: "Tel-Tek Electronics" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 20, 2004 2:52 PM Subject: [TechAssist] RCA MM32110 Chassis MMC101GCE > I have a set here where I loose my Filament voltage to the CRT after a > few minutes. > > Anyone run into this previously. This chassis looks like it's a pig to > pull, and work on the underside. > > Any info regarding intermittent loss of filaments would be appreciated. > HV and sound stay when this happens. > > Thanks. > > -Ed- > > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/